1. Technical specifications and indicators
1.1 Instructions and technical indicators
1.1.1 The purpose of the accelerator
1.1.2 Technical indicators
1.1.3 General description of the accelerator
1.2 Description and operation of accelerator equipment
1.2.1 The accelerator's console
1.2.2 Electron gun
1.2.3 Accelerating tube
1.2.4 Klystron modulator
1.2.5 Vacuum system
1.2.6 Water cooling system
1.2.7 Magnet system
1.2.8 Microwave system
1.2.9 Scanning system
1.2.10 Safety interlocking system
1.2.11 Conveyor system
1.2.12 Radiation shielding workshop
1.2.13 Irradiation technology
2. Installation manual
2.1 Introduction
2.2 Purpose and technical indicators
2.2.1 Purpose
2.2.2 Main technical parameters
2.3 Equipment list
2.4 equipment installation
2.4.1 Regulations and standards based on the building of a factory building
2.4.2 Recommended layout of accelerator equipment
2.4.3 Accelerator installation process
2.4.5 Modulator placement
2.4.6 Control system placement
2.4.7 Scram button
2.4.8 Warning bell and warning lamp
2.5 power supply
2.6 Heat dissipation and ventilation
2.7 SF6 and liquid nitrogen equipment
2.8 Installation technology
2.9 Safety and environmental requirements
2.9.1 Electrical safety
2.9.2 Radiological safety protection
2.9.3 Fire prevention
3. Operation manual
3.1 Accelerator system composition
3.2 Computer controlled device startup program
3.2.1 The control interface of the accelerator
3.2.2 Operation process
3.2.3 Matters needing attention
3.3 Sub system operation
3.3.1 Vacuum system
3.3.2 Operation method of microwave system
3.3.3 Description of the use of triangular wave scanners
3.3.4 Instructions for the use of thermostatic unit
3.3.5 Instructions for the use of water cooling unit
3.3.6 The operation of the conveyor
3.3.7 Security check
3.3.8 Irradiation process
4. Service Manual
4.1 Preface
4.1.1 Summary
4.1.2 Major equipment
4.1.3 The performance of the whole system
4.2 Routine maintenance of accelerator
4.2.1 Preventive maintenance
4.3 Function of important parts
4.3.1 The central controller
4.3.2 Modulator
4.3.3 Water cooling system
4.3.4 Accelerating tube and its accessories
4.3.5 Microwave system
4.4 Fault types and its exclusion methods
4.4.1 Summary
4.4.2 Common fault analysis
4.4.3 Thermostat unit and cooling unit
4.4.4 Control system
4.4.5 No beam or beam is abnormal
4.5 Inspection and maintenance
4.5.1 Routine inspecion
4.5.2 Periodic inspection
4.5.3 Maintenance
4.6 Replacement and debugging of parts
4.6.1 Disassembly, installation and debugging of klystron
4.6.2 The replacement of the thyratron
4.6.3 Replacement of gas cylinder
4.7 Safety precautions
4.7.1Summary
4.7.2 Danger
4.7.3 Emergency treatment
4.7.4 Safety regulations
